三河マルシェ【MARCHE】三河エリアのコミュニティポータルサイト

So that you can make the laminated plywood more beautiful, we may need to find out how to paint your pet. You can color your current Laminated MDF and Laminated particle board geared to your style.







2

Point：


Getting ready before painting

Steps to be able to paint

Old paint



Preparing before painting


l Large sandpaper

l Sanding equipment (optional)

l Safety equipment

l Primer

l Drawing

l Paint brush or paint roller

l Fresh cloth

l Solvent



Steps to paint


The first step - surface sand
The most important idea to note is that you need to wear a protective cover up and goggles before sanding to ensure that you don't inhale wood chips or have dust within your eyes. Before painting, it's essential to sand the surface in the laminated plywood. Remove dust and debris from the board and sand which includes a rough sandpaper. You can use a sander or an easy sandpaper. Then, wipe the surface using a clean cloth. The exterior is finely ground by using fine sandpaper.



The 2nd step - Clean your surface
Wipe the laminated plywood having a damp cloth. Be certain to remove all dust debris and allow the aboard to dry. This can be more conducive to subsequent use.



The third step - the applying of primer
Although detonation just isn't always necessary before painting wood, laminated plywood need to be painted first because the surface in the board is highly absorbent. The primer will saturate the particular laminated plywood, making the painted surface stronger and bonded. You can find pre-launched laminated plywood, but they're just more expensive. Depending on the paint you choose, pick from oil-based or acrylic-based primers then apply a primer having a paint brush. If the actual surface is large, a paint roller works extremely well.



The forth step - Scrub laminated plywood and apply an additional coat
After the primer possesses dried, the plate will be polished with 220 grit papers. Then apply a primer and allow it to needlessly dry.



The fifth phase - Apply paint plus sand
Apply a thin layer of paint into the board with a remember to brush. Let the boards dry and then gently sand them. And then, apply a layer involving paint. Allow to dried before touching or applying laminated plywood for yet another project.



The sixth stage - Clean your hair brush
When you keep the brushes clean to the next time, clean these individuals and let them dry out. If you use oil-based coloration, use a solvent to completely clean the paint brush. When you paint with water, you'll be able to wash the brush using soap and water.



Previous paint


Maybe you have used laminated plywood for a while, but you want in making it look more beautiful, you can take them off and paint it, which is the exact effect.



First remove the laminated plywood which has a screwdriver to work more proficiently. If there is some decoration within the laminated plywood, you also can remove the decoration first to better paint pertaining to him.



laminated plywood has to remove surface dust after which wipe it with any damp cloth or some sort of soft sponge. Make sure that the laminated plywood should be dry prior to deciding to continue working. Then use rough grit sandpaper and sander to clear out the old paint. If you can find holes in the laminated plywood, put them with wood putty. Leading to a compound begins to harden, the putty is inserted in the hole with a putty knife and leveled that has a putty knife. Most lumber putty products harden throughout 20 minutes. Allow the putty to dry completely for as long as 12 hours.



Use rough sandpaper again after finishing the prior work to eliminate every excess wood putty and also the primer on the particular surface. Apply the 1st primer, completely dry, fine sand with sandpaper, and apply an extra primer. Usually, two layers of primer are sufficient for the laminated plywood. The final primer following the primer is completely dried out. Start with a prime corner and apply the best layer of paint. Use a smaller paint roller if you want to avoid visible brush strokes. Use a small brush to hide areas that you can't reach with the roller. Let the laminated plywood dried overnight. After the paint seemingly dry, use a screwdriver to be able to reinstall the laminated plywood.



After painting, look at ones laminated plywood, is it more integrated with all your style? You can in addition freely combine various fresh paint methods.
https://www.eoncredgroup.com/Laminated-Board-pl3452745.html